The sides glued up well, and progress continues – after removing the clamps I gave the sides a quick clean-up with sandpaper to remove glue squeeze-out. Titebond liquid hide glue is great to work with, allowing some slip time to get everything lined up ok, but then once it starts to bind it holds well and dries within a few hours.

The mandolin is now starting to look like an instrument, but it is still fairly rough around the edges. The binding provides a decorative border, but also provides additional strength and protection for the joints. I have been quite worried about the gluing process, because hide glue has a use-by date, and I was half-way through before I read the bottle and found it was out of date by six months. Apparently Titebond put a 12 month use-by date on, but liquid hide glue can last 12-18 months. Perhaps I was lucky this time. But if any components fail I will be buying a new bottle forthwith. I could use the hide granules, but that would involve messy use of double boilers and rushing to use it before it cools etc. The liquid glue is very easy to use, is versatile at room temperature and works well.

Anyhow, I had bought some inlay banding strips at the 2008 Canberra Timber and Working With Wood show with a view to their potential for instrument bindings. The banding strips are about 1.5mm thick and about 6mm wide and 1.2metres long. They are easy to use, being flexible enough to do each of the bouts without steam bending, and thin enough to cut easily with a sharp knife.

You’ll have to wait to see how it looks, as they are still taped in position after gluing, but the early indications are good 🙂

mandolin bindings

mandolin bindings

The next pictures won’t look much different as I still have to add the bindings for the back/bout interface!

The small round piece of blackwood in the foreground will become the back button, concealing the two pins that help to locate the neck – but more on that tomorrow.

I basically have the back bindings, fitting the fingerboard and some finishing work on the head before fitting it up ready to play – so not long now!